PRICING BY MIRACOMP SET BUILDER
For hosts and revenue managers on PriceLabs

Build the right comp set.
In minutes, not hours.

Upload your PriceLabs Market Dashboard export, add a few facts about your property, and get three comp sets with a reason for every listing. Then paste them straight into PriceLabs.

Cancel anytime. Never changes your prices.

Your Market Dashboard export
Plus a few facts about your property
  • 10–20
    Targets
    Rate comparables
  • Up to 45
    Broad
    Pacing peers
  • 20
    Top earners
    The ceiling
Id lists with suggested set names, ready to paste into PriceLabs, plus a CSV of every listing.
The problem

Your comp set decides your rate.
Most are built by hand.

Your comp set is what you read your rates against. If it holds the wrong homes, every price decision starts from the wrong place. Built by hand, most comp sets carry the same mistakes.

Built by hand
  • Amenity flags taken at face value, even when they are wrong
  • Two, four and six bedrooms mixed in one set
  • One outlier stretches the whole revenue band
  • No record of why a listing is in the set
  • Hours of scrolling the map and the grid
With Comp Set Builder
  • Flags you can correct in one click: mark Shared pool only and the sets rebuild
  • One bedroom below to one above, never a mixed bag
  • Outliers far above the band kept out of Targets and Broad
  • A one-line reason for every listing, in or out
  • Minutes, not hours
How it works

Three steps.
One export from PriceLabs.

  1. Step 1

    Download from PriceLabs

    Export the listings from your Market Dashboard:

    Market DashboardListings grid below the mapView Comp Set ListingsColumn VisibilitySelect AllDownload CSV

    Optional: your listing’s Revenue On The Books report, to see your own last 12 months beside the sets.

  2. Step 2

    Upload and add your property

    Drop in the files, then tell it about your home.

    • Bedrooms
    • Guests
    • Private pool
    • Hot tub
    • Airbnb link or location
  3. Step 3

    Paste your sets into PriceLabs

    Copy an id list. In PriceLabs, choose Create New Comp Set and paste it into the AI box above the Listing ID filter. Each list comes with a suggested set name.

    TargetsBroadTop earners
What you get

Three comp sets.
Each with one job.

Targets
10–20
close, similar, proven homes
Rate comparables

The homes you read prices against. Close by, the same kind of home, with a track record.

Broad
Up to 45
nearby homes
Pacing peers

For occupancy, pickup and booking-window graphs. Not for setting rates.

Top earners
20
best homes of your size
The ceiling

The 20 best homes of your size anywhere in the export. Study what they do differently.

A reason for every listing

Every listing in the export gets one line that says why it is in or out. You can check every call.

A real map

A Google map with distance rings around your property, so you see exactly where each set sits.

Your revenue beside the market

Add your Revenue On The Books report and your last 12 months sit beside each set, with the 25 highest earners in the export alongside.

Data checks and outliers

Listings never open in the past year, unit and condo titles, hotel rooms, heavy owner blocks and thin reviews are caught. Outliers far above the band stay out of Targets and Broad. A checklist shows what to verify.

Edit and rebuild instantly

Mark a listing Not a comp, Shared pool only or Make target. Change distance, bedrooms, rating, revenue band, set sizes or title rules. The sets rebuild instantly.

Export, ready for PriceLabs

Listing-id lists ready to paste, with suggested set names, plus a CSV of every listing. Every run is saved to your account.

The dashboard

Every set at a glance.
Every call you can check.

The map, the revenue of each set, your own last 12 months, the 25 highest earners in the export and a checklist of what to verify, on one page.

See the live sample
Comp Set Builder · 5-bedroom pool home
Targets
16
Broad
45
Top
20
Revenue by month
Targets Broad
Every listing, with a reason
  • Target5 BR pool home5 BR, private pool, 0.8 mi, in band
  • Target5 BR lake house5 BR, hot tub, 1.4 mi, in band
  • Broad4 BR cabinOne bedroom below, 3.1 mi
  • OutUnit 12BUnit or condo in the title
  • Out6 BR estateFar above the revenue band
  • Out5 BR chaletNever open in the past year

Illustration. The live sample runs the real dashboard on an invented market of 480 listings.

Built on a proven method

The method our revenue managers use.
Now in your browser.

Pricing by Mira is a revenue management company. Comp Set Builder follows the same steps our revenue managers take when they build a comp set by hand.

  1. 01

    Scan the whole market by revenue first

    Start from every listing in the export, ranked by revenue, before any filter narrows the view.

  2. 02

    Run the hygiene checks

    Set aside listings never open in the past year, unit and condo titles, hotel rooms, heavy owner blocks and thin reviews.

  3. 03

    One bedroom below to one above

    Compare like with like on size instead of a mixed bag of bedroom counts.

  4. 04

    Keep a tight revenue band

    Hold the sets to homes that earn in a similar range, and keep outliers far above the band out of Targets and Broad.

  5. 05

    Give every listing a reason

    Write down why each listing is in or out, so anyone can review the set and question a specific call.

Plain about the limits
  • Figures for other listings are PriceLabs estimates for the past 365 days, not audited results.
  • The export cannot tell a private pool from a community pool, so verify your targets. The dashboard gives you a checklist.
  • It never changes your prices and never creates anything in PriceLabs. You paste the lists in yourself.
  • Your files are read in your browser. The parsed listings are stored in your account so you can reopen your runs.
Pricing

One plan.
Everything included.

Build as many comp sets as you need, for your own homes or the ones you manage. Cancel anytime.

Want to look first? Open the live sample.

Comp Set Builder membership
$49/month
Cancel anytime.
  • Unlimited comp sets
  • Saved runs in your account
  • Google map with distance rings
  • Exports: PriceLabs id lists with set names, plus a CSV of every listing
  • Every product update included

Secure checkout by Stripe. Instant access after payment.

Already a member? Sign in

FAQ

Questions,
answered plainly.

Something else? Email team@pricingbymira.com.

Do I need PriceLabs?
Yes. Comp Set Builder reads the listings export from a PriceLabs Market Dashboard, and the sets it builds are made to be pasted back into PriceLabs. You need a Market Dashboard for the area your property is in.
Which export do I need?
The Market Dashboard listings export. In PriceLabs, open your Market Dashboard, go to the listings grid below the map, choose View Comp Set Listings, open Column Visibility, choose Select All, then Download CSV. Optionally, add your listing’s Revenue On The Books report to see your last 12 months beside the sets.
Is my data private?
Your files are read in your browser. The parsed listings and the property facts you enter are stored in your account so you can reopen your runs. We do not sell your data, and we delete it on request. The privacy policy has the details.
Will it change my prices?
No. Comp Set Builder never changes your prices and never creates anything in PriceLabs. It gives you id lists and set names. You decide what to paste in.
Can I cancel?
Yes, anytime, from the billing portal. Your access continues until the end of the period you have paid for, and you are not billed again.
Does it work for any market and size?
It works with any Market Dashboard export and any bedroom count. It compares your home with homes from one bedroom below to one above. If the export has none at one of those sizes, the dashboard tells you and explains how to download a fuller export. You can also widen the distance, bedroom or revenue settings and rebuild.
Are the revenue numbers exact?
No. Figures for other listings are PriceLabs estimates for the past 365 days, not audited results. Your own last 12 months come from your Revenue On The Books report. Use the figures to compare homes, and verify your targets before you rely on them.
Can I use it for clients?
Yes. The plan includes unlimited comp sets, so revenue managers can build one for each property they manage. Only upload exports you are allowed to use under your PriceLabs account terms.

Your next comp set.
Built in minutes, not hours.

$49/month. Cancel anytime. Never changes your prices.

See the live sample